Sanuwave Receives FDA De Novo Decision to Immediately Market the Dermapace System for the Treatment of Diabetic Foot Ulcers in the U.S.

SUWANEE, GA, Jan. 02, 2018 (GLOBE NEWSWIRE) — SANUWAVE Health, Inc. (OTCQB: SNWV) has announced that the U.S. Food and Drug Administration (FDA) has issued its decision on the de novo submission for the dermaPACE® System.  Their decision, dated December 28, 2017, permits the marketing of the dermaPACE System as a Class II medical device used for the treatment of Diabetic Foot Ulcers (DFU) in the U.S., the world’s largest medical device market.  This order by FDA is the culmination of intensive clinical studies by SANUWAVE and diligent work by both SANUWAVE employees and our regulatory partners, Musculoskeletal Clinical Regulatory Advisers (MCRA) in successfully submitting documentation and interacting with FDA during the clearance process.

The dermaPACE system was evaluated using two studies under an FDA approved IDE. The studies were designed as prospective, randomized, double-blind, parallel-group, sham-controlled, multi-center 24-week studies at 39 centers. A total of 336 subjects were enrolled and treated with either active dermaPACE plus conventional therapy or sham dermaPACE plus conventional therapy (a.k.a. standard of care). Conventional therapy included, but was not limited to, debridement, saline-moistened gauze, and pressure reducing footwear. The objective of the studies was to compare the safety and efficacy of the dermaPACE System to sham-control application. The prospectively defined primary efficacy endpoint for the dermaPACE System studies was the incidence of complete wound closure at 12 weeks post-initial application of the dermaPACE system (active or sham). Complete wound closure was defined as complete skin re-epithelialization without drainage or dressing requirements, confirmed over two consecutive visits within 12-weeks. If the wound was considered closed for the first time at the 12-week visit, then the next visit was used to confirm closure. Investigators continued to follow subjects and evaluate wound closure through 24 weeks.

The patients who were treated with the dermaPACE System showed an increase in wound healing at 24 weeks with a 44 percent wound closure rate. Those patients treated with the sham shock wave therapy showed a 30 percent wound closure rate during the same time period.  Unlike other advanced DFU treatment modalities, the dermaPACE protocol did not allow any form of closure by secondary intent (e.g. sutures).  The wound closures in the dermaPACE arm were robust with less than 10% rates of recurrence.  In addition, the rate of wound area reduction in the dermaPACE cohort was significant compared to that of the Sham arm beginning at six weeks and continuing on through the remainder of the 24 treatment and follow-up phases.

The dermaPACE System offers a novel treatment modality for DFUs, delivering shock wave energy in a non-invasive manner. Treatment consists of 4 – 8 short, non-invasive applications over a 2 to 10 week period.  Monitoring and standard of care is required thereafter. This non-invasive treatment provides lower patient adverse events compared with other procedures like amputation or skin grafting, and as a result, the dermaPACE System provides a safe and effective option for treating patients with diabetic foot ulcers.

There are many different modalities, ranging from simple dressings, to biologics, matrices, pharmaceuticals, and devices.   Existing therapies require either:

continuous application of a pharmacologic agent;

  • repeated application of a skin equivalent (up to 8 times over a 12 week period);
  • repeated implantation of a dermal substitute (weekly, up to 8 applications and after a 6 week run-in); or
  • the attachment of a vacuum assisted device to the wound area for prolonged periods of time.

SANUWAVE’s Chairman of the Board and CEO, Kevin A. Richardson II said, “This regulatory clearance marks  the biggest milestone yet for SANUWAVE, and the Company is poised to commence the commercial rollout in the United States shortly.” The dermaPACE System is currently available in the European Union, South Korea, Canada, Australia, and New Zealand and is under regulatory review in Taiwan and Indonesia.  SANUWAVE has just entered into a major distribution agreement in Brazil, where device approval is anticipated later in 2018.

According to American Diabetes Association statistics from 2015, 30.3 million Americans, or 9.4% of the population, had diabetes.  And the annual cost of diabetes, was $245 billion in 2012. This figure comprises $176 billion in excess healthcare expenditures and $69 billion in reduced workforce productivity.  Approximately 15% of diabetic patients will develop lower extremity ulcers and 14 – 24% of DFUs will eventually undergo amputation. “The market opportunity for the dermaPACE System in the U.S. is significant.  As U.S. diabetes rates continue to rise and growing numbers of diabetics develop DFUs, we are confident dermaPACE will positively redefine the treatment of diabetic foot ulcers in the U.S.,” said Mr. Richardson.

In addition to causing suffering and morbidity, foot lesions in diabetic patients have substantial economic consequences. Diabetic foot complications result in huge costs for both society and the individual patients. The economic burden of DFUs and the complications arising from them are enormous. The cost to treat a DFU over a 2-year period was $27,987 in 1995 and, based on the medical component of the US Consumer Price Index, rose to $46,841 in 2009. These high costs have been linked to frequent outpatient appointments, in-patient days, laboratory tests, drugs/medications, hospital stays, and secondary complications of osteomyelitis and amputation. Direct costs for a lower-extremity amputation range from $22,700 to $51,300.

Mr. Richardson continues, “Due to its non-invasive nature, the dermaPACE System does not prevent the use of other treatment options (i.e., dermal grafts, wound matrices, biologic gels, and surgery) in conjunction with the dermaPACE System or in later stages of wound care. In fact, wound care professionals using the device in Europe, Canada, and Australia use the dermaPACE System in the progression of their treatment regimen for wound management with healing as the final intent.  Not all wounds, nor all patients are the same; therefore, each wound is treated on an individual basis based on the treating physician’s knowledge and the treatment options available.  The dermaPACE system offers the ability to manage the DFUs chronicity and is a powerful tool in the clinician’s arsenal to achieve wound closure.”

U.S. Commercial Launch

SANUWAVE has engaged in a range of preparatory activities to ensure it is ready for an imminent U.S. market release, including identifying and hiring the first tier of sales personnel; dialogue with targeted hospitals for initial adoption; and conducting early industry and patient awareness initiatives.

“With the FDA de novo order in place, we will now accelerate our U.S. sales process with strategic partnerships and the hiring of key sales personnel to begin initial, targeted market release in the U.S” said Mr. Richardson. “SANUWAVE is excited to advance our efforts to bring the dermaPACE System to the U.S. market.”

Our Regulatory Partners

In January 2015 SANUWAVE retained Musculoskeletal Clinical Regulatory Advisers, LLC (MCRA) to lead the Company’s interactions and correspondence with the FDA for the dermaPACE. MCRA has successfully worked with the FDA on numerous PMAs for various musculoskeletal, restorative and general surgical devices since 2004.  At the time, SANUWAVE had withdrawn a PMA submitted using data from the first DFU clinical study.  At FDA’s request, SANUWAVE initiated a supplemental DFU study.  SANUWAVE recognized the need to pull in MCRA’s expertise to help navigate uncharted regulatory pathways.

Glenn Stiegman, MCRA’s Vice President of Clinical and Regulatory Affairs, explained, “MCRA was intrigued by SANUWAVE’s position.  Their studies had compelling clinical data showing that the dermaPACE System was safe and effective, and SANUWAVE’s situation presented a unique but solvable challenge.  We are pleased SANUWAVE asked us to work with them to develop and execute an FDA response strategy and assist in leading the dermaPACE to clearance.”

Mr. Richardson added, “We chose MCRA for their extensive regulatory experience and interaction with FDA over the past decade. They took data from, essentially, a Not-Approvable PMA, and worked wonders in obtaining a de novo decision with basically the same data. Their depth of knowledge and experience in regulatory and clinical science made them an excellent partner for working hand-in-hand with our team and the FDA.”

About SANUWAVE Health, Inc.

SANUWAVE Health, Inc. (OTCQB:SNWV) (www.sanuwave.com) is a shock wave technology company initially focused on the development and commercialization of patented noninvasive, biological response activating devices for the repair and regeneration of skin, musculoskeletal tissue and vascular structures. SANUWAVE’s portfolio of regenerative medicine products and product candidates activate biologic signaling and angiogenic responses, producing new vascularization and microcirculatory improvement, which helps restore the body’s normal healing processes and regeneration. SANUWAVE applies its patented PACE technology in wound healing, orthopedic/spine, plastic/cosmetic and cardiac conditions. Its lead product candidate for the global wound care market, dermaPACE, is CE Marked throughout Europe and has device license approval for the treatment of the skin and subcutaneous soft tissue in Canada, Australia and New Zealand. In the U.S., dermaPACE System has been approved under the FDA’s de novo petition process for the treatment of diabetic foot ulcers. SANUWAVE researches, designs, manufactures, markets and services its products worldwide, and believes it has demonstrated that its technology is safe and effective in stimulating healing in chronic conditions of the foot (plantar fasciitis) and the elbow (lateral epicondylitis) through its U.S. Class III PMA approved OssaTron® device, as well as stimulating bone and chronic tendonitis regeneration in the musculoskeletal environment through the utilization of its OssaTron, Evotron® and orthoPACE devices in Europe, Asia and Asia/Pacific. In addition, there are license/partnership opportunities for SANUWAVE’s shock wave technology for non-medical uses, including energy, water, food and industrial markets.

About MUSCULOSKELETAL CLINICAL REGULATORY ADVISERS, LLC (MCRA)

Founded in 2004, Musculoskeletal Clinical Regulatory Advisers, LLC (MCRA) is a leading adviser and clinical research organization to the neuro-musculoskeletal and medical device industries. MCRA’s value lies in its industry experience and integration of five business value creators: regulatory, reimbursement, clinical research, healthcare compliance and quality assurance. MCRA’s integrated approach of these key value creating initiatives provides unparalleled expertise for its clients. MCRA has offices in Washington, DC, Manchester, CT and New York, NY, and serves over 500 clients globally.

Forward-Looking Statements

This press release may contain “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995, such as statements relating to financial results and plans for future business development activities, and are thus prospective. Forward-looking statements include all statements that are not statements of historical fact regarding intent, belief or current expectations of the Company, its directors or its officers. Investors are cautioned that any such forward-looking statements are not guarantees of future performance and involve risks and uncertainties, many of which are beyond the Company’s ability to control. Actual results may differ materially from those projected in the forward-looking statements. Among the key risks, assumptions and factors that may affect operating results, performance and financial condition are risks associated with the regulatory approval and marketing of the Company’s product candidates and products, unproven pre-clinical and clinical development activities, regulatory oversight, the Company’s ability to manage its capital resource issues, competition, and the other factors discussed in detail in the Company’s periodic filings with the Securities and Exchange Commission. The Company undertakes no obligation to update any forward-looking statement.

For additional information about the Company, visit www.sanuwave.com.

Contact:

Millennium Park Capital LLC
Christopher Wynne
312-724-7845
cwynne@mparkcm.com

SANUWAVE Health, Inc.
Kevin Richardson II
Chairman of the Board
978-922-2447
investorrelations@sanuwave.com

OrthoPediatrics Corp. Announces Preliminary Revenue for Fourth Quarter and Full Year 2017

WARSAW, Ind., Jan. 05, 2018 (GLOBE NEWSWIRE) — OrthoPediatrics Corp. (“OrthoPediatrics”) (NASDAQ:KIDS), a company exclusively focused on advancing the field of pediatric orthopedics, announced today its preliminary unaudited revenue for the fourth quarter and full year ended December 31, 2017.

Preliminary unaudited fourth quarter revenue is expected to be in the range of $11.5 million to $11.7 million, up 22% to 24%, when compared to $9.4 million in the fourth quarter of 2016. OrthoPediatrics’ preliminary unaudited full year 2017 revenue is expected to be in the range of $45.4 million to $45.6 million, representing annual growth of 22%.

The company plans to release its fourth quarter and full year 2017 financial results in early March 2018. The quarterly and annual preliminary revenue estimates for 2017 included in this press release are prior to the completion of review and audit procedures by the company’s independent registered public accounting firm and are therefore subject to adjustment.

About OrthoPediatrics Corp.
Founded in 2006, OrthoPediatrics is an orthopedic company focused exclusively on providing a comprehensive product offering to the pediatric orthopedic market to improve the lives of children with orthopedic conditions. OrthoPediatrics currently markets 24 surgical systems that serve three of the largest categories within the pediatric orthopedic market. This offering spans trauma & deformity, complex spine and ACL reconstruction procedures. OrthoPediatrics’ global sales organization is focused exclusively on pediatric orthopedics and distributes its products in the United States and 35 countries outside the United States.

Forward-Looking Statements
Any forward-looking statements are subject to risks and uncertainties such as those described in OrthoPediatrics’ most recently filed Quarterly Report on Form 10-Q for the period ended September 30, 2017 which OrthoPediatrics filed with the Securities and Exchange Commission on November 13, 2017.  Actual results may differ materially from anticipated results.

Investor Contacts
The Ruth Group
Tram Bui / Emma Poalillo
(646) 536-7035 / 7024
tbui@theruthgroup.com / epoalillo@theruthgroup.com

RTI Surgical Outlines 2018 Guidance and Long-Term Goals

January 05, 2018

ALACHUA, Fla.–(BUSINESS WIRE)–RTI Surgical, Inc. (Nasdaq:RTIX), a global surgical implant company, today outlined its 2018 guidance and long-term financial goals.

Based on its recent financial results and current business outlook, RTI has developed the following financial guidance for 2018:

  • The Company expects full year revenues in the range of $280 million and $290 million.
  • RTI expects full year EBITDA to be in the range of $32 million to $38 million.

The Company noted the following assumptions are included in its guidance:

  • Relatively stable market conditions and regulatory environment;
  • Positive revenue contribution from the acquisition of Zyga Technology – announced January 4th, 2018;
  • Ongoing positive impact of efforts to reduce complexity and implement operational excellence; and
  • Continued marketing of map3® cellular allogeneic bone graft and minimal negative revenue impact related to recent FDA warning letter.

“We expect 2018 will be a year of continued progress with the accelerating implementation of our strategic transformation plans,” said Camille Farhat, President and CEO. “Our guidance reflects the early results of our initiatives and the ongoing investments necessary to produce sustainable profitable growth and improved cash flow.”

The Company also outlined long-term financial goals that are expected to be achieved within five years:

  • Expand revenue to more than $500 million
  • Double EBITDA margin to more than 20%

Farhat explained, “We expect the initiatives we began to reduce complexity and drive operational excellence in 2017 to produce improving margins and cash flow in our tissue focused operations in the coming years. This expected improvement in financial performance will allow us to fund organic and acquisitive growth in our spine focused operations. We are committed to driving significant financial improvements and increasing long-term shareholder value.”

About RTI Surgical, Inc.

RTI Surgical is a leading global surgical implant company providing surgeons with safe biologic, metal and synthetic implants. Committed to delivering a higher standard, RTI’s implants are used in sports medicine, general surgery, spine, orthopedic, trauma and cardiothoracic procedures and are distributed in nearly 50 countries. RTI has four manufacturing facilities throughout the U.S. and Europe. RTI is accredited in the U.S. by the American Association of Tissue Banks and is a member of AdvaMed. For more information, please visit www.rtix.com.

Forward-Looking Statements

This communication contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. These forward-looking statements are based on management’s current expectations, estimates and projections about our industry, our management’s beliefs and certain assumptions made by our management. Words such as “anticipates,” “expects,” “intends,” “plans,” “believes,” “seeks,” “estimates,” variations of such words and similar expressions are intended to identify such forward-looking statements. In addition, except for historical information, any statements made in this communication about anticipated financial results, growth rates, new product introductions, future operational improvements and results or regulatory actions or approvals or changes to agreements with distributors also are forward-looking statements. These statements are not guarantees of future performance and are subject to risks and uncertainties, including the risks described in public filings with the U.S. Securities and Exchange Commission (SEC). Our actual results may differ materially from the anticipated results reflected in these forward-looking statements. Copies of the company’s SEC filings may be obtained by contacting the company or the SEC or by visiting RTI’s website at www.rtix.com or the SEC’s website at www.sec.gov.

Contacts

RTI Surgical, Inc.
Media Contact:
Molly Poarch, +1 224-287-2661
mpoarch@rtix.com
or
Investor Contact:
Nathan Elwell, +1 847-530-0249
nelwell@lincolnchurchilladvisors.com

SpineGuard Reports 2017 Revenue of €8.2M up 10%

January 04, 2018

PARIS & SAN FRANCISCO–(BUSINESS WIRE)–Regulatory News:

SpineGuard (Paris:ALSGD) (FR0011464452 – ALSGD), an innovative company that develops and markets disposable medical devices designed to make spine surgery safer, reported today its consolidated full-year 2017 revenue grew of €8.2 million up 10% and 12% at constant exchange rate (cc).

Stéphane Bette, CEO and co-founder of SpineGuard, said: “We are closing 2017 with a company record quarter despite a strong comparable base. We are extremely satisfied with this strong finish, supported by solid US sales, a first order in China, a sustained business in France and a tender order for the Middle East. As we continue to deliver double-digit growth with the PediGuard product range, we also support the launch of DSG™ screw business while developing our exciting R&D pipeline with the robotic application of DSG and the visual feedback capability to come into fruition in 2018. Last but not least, during the past 6 months the company made good progress towards its operating profitability goal for the end of 2018 with a positive impact on the Operating Result in FY 2017.”

€ thousands – IFRS 2017 2016 Variance
First Quarter 2,169 1,760 +23%
Second Quarter 2,030 1,873 +8%
Half-Year 4,199 3,633 +16%
Third Quarter 1,793 1,678 +16%
Fourth Quarter 2,182 2,152 +1%
Second Half 3,975 3,830 +4%
Full year 8,174 7,463 +10%

Unaudited

For the full year 2017, 8,764 DSG enabled devices were sold compared with 8,603 in FY 2016.
5,303 units were sold in the United States, representing 61% of total units sold. Revenue from the USA increased by 11% (14% cc) to €6,660k compared with €5,982k in FY 2016. In the rest of the world, revenue ended at €1,514k vs. €1,480 in FY 2016 back to growth at +2%. The consolidated revenue growth is 12% cc.

In the fourth quarter of 2017, revenue increased to €2,182k, compared with €2,152k in the fourth quarter of 2016 or 1%. In the USA, the growth was 5% cc establishing a company history record. In the Rest of the World, growth was 30% in the fourth quarter of 2017 thanks to the first order in China, a sustained activity in France and a tender order in Saudi Arabia.

Next financial press release: 2017 annual results on March 14, 2018.

About SpineGuard®
Founded in 2009 in France and the USA by Pierre Jérôme and Stéphane Bette, SpineGuard’s mission is to make spine surgery safer by bringing real-time digital technology into the operating room. Its primary objective is to establish its proprietary DSG™ (Dynamic Surgical Guidance) technology as the global standard of surgical care, starting with safer screw placement in spine surgery and then in other surgeries. PediGuard®, the first device designed using DSG, was co-invented by Maurice Bourlion, Ph.D., Ciaran Bolger, M.D., Ph.D., and Alain Vanquaethem, Biomedical Engineer. It is the world’s first and only handheld device capable of alerting surgeons to potential pedicular or vertebral breaches. Over 60,000 surgical procedures have been performed worldwide with DSG™ enabled devices. Numerous studies published in peer-reviewed medical and scientific journals have demonstrated the multiple benefits that PediGuard® delivers to patients, surgical staff and hospitals. SpineGuard is expanding the scope of its DSG™ platform through strategic partnerships with innovative medical device companies and the development of smart instruments and implants. SpineGuard has offices in San Francisco and Paris. For further information, visit www.spineguard.com.

Disclaimer
The SpineGuard securities may not be offered or sold in the United States as they have not been and will not be registered under the Securities Act or any United States state securities laws, and SpineGuard does not intend to make a public offer of its securities in the United States. This is an announcement and not a prospectus, and the information contained herein does and shall not constitute an offer to sell or the solicitation of an offer to buy, nor shall there be any sale of the securities referred to herein in the United States in which such offer, solicitation or sale would be unlawful prior to registration or exemption from registration.

Contacts

SpineGuard
Stéphane Bette
Chief Executive Officer
Tel: +33 (0) 1 45 18 45 19
s.bette@spineguard.com
or
Manuel Lanfossi
Chief Financial Officer
Tel: +33 (0)1 45 18 45 19
m.lanfossi@spineguard.com
or
NewCap
Investor Relations & Financial Communication
Florent Alba / Pierre Laurent
Tel: +33 (0)1 44 71 94 94
spineguard@newcap.fr

RTI Surgical Announces Acquisition of Zyga Technology, Inc.

January 04, 2018

ALACHUA, Fla.–(BUSINESS WIRE)–RTI Surgical, Inc. (Nasdaq: RTIX), a global surgical implant company, today signed an agreement to acquire Zyga Technology, Inc., with closing subject to filing with the state of Delaware. Zyga Technology is a leading spine-focused medical device company that develops and produces innovative minimally invasive devices to treat underserved conditions of the lumbar spine. Zyga Technology’s primary product is the SImmetry® Sacroiliac Joint Fusion System.

“Acquiring Zyga Technology further advances our strategic transformation focused on reducing complexity, driving operational excellence and accelerating growth,” said Camille Farhat, President and CEO. “We are increasing our focus on both internal development and external investment, and acquiring Zyga Technology’s innovative minimally invasive treatment both accentuates our robust spine portfolio and opens significant opportunities to accelerate growth.”

Farhat added, “The acquisition provides access to a procedure that has been growing in excess of 20% in recent years and leverages the core competencies of our Spine franchise. We believe it is perfectly aligned with our Spine-focused expansion strategy to pursue niche differentiated products, to gain scale and customer retention and support portfolio pull-through along the way. As part of the RTI team, we believe Zyga has the potential to produce significant growth by gaining market share, growing procedure volume and driving increased adoption. SImmetry® is a differentiated product designed to drive fusion and supported by clinical data and, with access to RTI’s larger, sophisticated sales force, we will introduce the system to a much wider surgeon audience.”

The sacroiliac joint fusion (SIJF) market has seen significant growth in recent years and is estimated currently to be a $100 million market in the United States. By 2024, the SIJF market in the US is expected to exceed $200 million, anticipated to be driven mainly by an increase in procedure volumes and adoption by new surgeons.

Zyga Technology is a private company with approximately 30 employees and approximately $4 million in annual revenue. Upon closing, RTI Surgical will fund the acquisition through a combination of cash and borrowing under its existing credit facility. Terms of the deal were not disclosed. The agreement has been executed as of today, January 4, 2018, by both parties. Closing will occur following the re-opening of the Delaware Department of State, which is presently closed due to inclement weather.

About RTI Surgical, Inc.

RTI Surgical is a leading global surgical implant company providing surgeons with safe biologic, metal and synthetic implants. Committed to delivering a higher standard, RTI’s implants are used in sports medicine, general surgery, spine, orthopedic, trauma and cardiothoracic procedures and are distributed in nearly 50 countries. RTI has four manufacturing facilities throughout the U.S. and Europe. RTI is accredited in the U.S. by the American Association of Tissue Banks and is a member of AdvaMed. For more information, please visit www.rtix.com.

About Zyga Technology, Inc.

Zyga Technology markets the SImmetry® Sacroiliac Joint Fusion System, a minimally invasive procedure intended for conditions including sacroiliac joint disruptions and degenerative sacroiliitis. The SImmetry® System is known for its ability to create a true SI joint arthrodesis, including decortication, bone grafting and fixation with a threaded implant. For more information, please visit www.zyga.com.

Forward-Looking Statements

This communication contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. These forward-looking statements are based on management’s current expectations, estimates and projections about our industry, our management’s beliefs and certain assumptions made by our management. Words such as “anticipates,” “expects,” “intends,” “plans,” “believes,” “seeks,” “estimates,” variations of such words and similar expressions are intended to identify such forward-looking statements. In addition, except for historical information, any statements made in this communication about anticipated financial results, growth rates, new product introductions, future operational improvements, gaining market share and results or regulatory actions or approvals or changes to agreements with distributors also are forward-looking statements. Additionally, the statement relating to the expected size of the SIJF market in the United States in 2024 is a forward-looking statement. These statements are not guarantees of future performance and are subject to risks and uncertainties, including the risks described in public filings with the U.S. Securities and Exchange Commission (SEC). Our actual results may differ materially from the anticipated results reflected in these forward-looking statements. Copies of the company’s SEC filings may be obtained by contacting the company or the SEC or by visiting RTI’s website at www.rtix.com or the SEC’s website at www.sec.gov.

Contacts

RTI Surgical, Inc.
MEDIA CONTACT:
Molly Poarch, +1-224-287-2661
mpoarch@rtix.com
or
INVESTOR CONTACT:
Nathan Elwell, +1-847-530-0249
nelwell@lincolnchurchilladvisors.com

ConforMIS announces results published in the Journal of Knee Surgery showing 100% of patients treated with iTotal CR achieve mechanical alignment in target range of +/- 3%

BILLERICA, Mass., Jan. 04, 2018 (GLOBE NEWSWIRE) — ConforMIS, Inc. (NASDAQ:CFMS), a medical technology company that offers joint replacement implants designed and manufactured to fit each patient’s unique anatomy, today announced the publication of a prospective study in The Journal of Knee Surgery, a peer-reviewed orthopedic journal, on December 14, 2017. The study investigated the ability of the iTotal CR Knee Replacement System restoring coronal plane mechanical axis alignment in a patient’s leg.

The study, which was independently performed by Dr. Gary Levengood at Sports Medicine South in Lawrenceville, Georgia, examined 63 consecutive patients he operated on using the ConforMIS iTotal CR implant system and ConforMIS iJig patient-specific instrumentation.  Results in each of the cases were verified using computer-assisted surgery (CAS).  According to the study results, perfect neutral coronal mechanical alignment of 0° was achieved in 84% of patients, with the remaining 16% of patients within +/-2° of neutral.  The patients had an average pre-operative deformity of 5.57° (range 12° valgus to 15°varus), and a post-operative average of 0.18° (range 0-2°) (p<0.0001).  Additionally, while 40 of the 63 patients had pre-operative extension deficits (the inability to fully extend the leg), no patients had postoperative extension deficits.

According to the study, neutral mechanical limb alignment, or alignment within +/- 3°, has previously been linked to better survivorship in TKA, while poor alignment has been linked to higher rates of implant failure. This study’s findings are consistent with those of a previous published study by Ivie et.al. from the Journal of Arthroplasty in 2014, which concluded that the ConforMIS iTotal was 1.8 times more likely to achieve a neutral mechanical alignment as compared to standard off-the-shelf knees.

Based on a review of the published literature, the authors reported that the results observed with the ConforMIS iTotal CR patient-specific, custom-made total knee implant with patient-specific instrumentation were found to be more consistently accurate than previous reports on patient-specific cutting guides used with standard off-the-shelf implants.  The authors noted that, according to the literature, patient-specific cutting guides used with standard off-the-shelf implants resulted in a high percentage of cases with an overall error in mechanical axis alignment greater than a threshold of 3 degrees.  The authors of the study suggest several key differences that may have contributed to the greater accuracy of the iTotal system with its iJig instrumentation compared with the published literature, including the use of a full set of ConforMIS patient-specific jigs with the ConforMIS custom-made implant, and the ability to maintain native medial and lateral offsets of the femur.

“As a surgeon, one of the most important goals to me with any knee replacement, is to achieve a neutral mechanical limb alignment. The inherent variability noted in the literature when using patient-specific jigs with an off-the-shelf implant, where the mechanical alignment too often fell outside of the +/- 3° acceptable range, was the impetus in studying this metric as I began to use this iTotal technology,” said Dr Levengood. “As our data shows, we were able to achieve precise alignment, with absolutely no outliers. Prior to using the ConforMIS iTotal CR, I utilized computer navigation to achieve a reproducible alignment; however, this added substantial time to my procedures and required surgical placement of tracking pins in each patient’s femur and tibia during the operation.  With the iTotal, I am provided a complete operative plan, from the CT scan each patient gets prior to surgery.  Based on these results, I have full confidence in the system to deliver consistent and improved surgical outcomes.”

“This independent study provides compelling new data demonstrating the accuracy of utilizing ConforMIS iJig instrumentation, with its built-in mechanical axis alignment and image guidance, in combination with our individually designed, patient-specific implants,” said Mark Augusti, Chief Executive Officer and President of ConforMIS.  “Importantly, it is consistent with earlier published results.  One of the drawbacks of patient-specific cutting guides when used with standard off-the-shelf implants that are not patient-specific has been the inability to consistently achieve neutral mechanical alignment. Dr. Levengood’s data demonstrate that the ConforMIS iTotal CR system does not share this problem.  This study adds enlightening data and analysis to the growing body of evidence that ConforMIS iJig Instrumentation, when used in conjunction with ConforMIS individually designed, patient-specific iTotal implants, provides superior results compared to other patient-specific instrumentation used with off-the-shelf implants.”

ConforMIS did not provide any economic support for this study.  Dr. Levengood previously has served as an advisor to ConforMIS.

About ConforMIS, Inc.

ConforMIS is a medical technology company that uses its proprietary iFit Image-to-Implant technology platform to develop, manufacture and sell joint replacement implants that are individually sized and shaped, or customized, to fit each patient’s unique anatomy.  ConforMIS offers a broad line of customized knee implants and pre-sterilized, single-use instruments delivered in a single package to the hospital.  In recent clinical studies, ConforMIS iTotal CR demonstrated superior clinical outcomes, including better function and greater patient satisfaction, compared to traditional, off-the-shelf implants.  ConforMIS owns or exclusively in-licenses approximately 420 issued patents and pending patent applications that cover customized implants and patient-specific instrumentation for all major joints.

For more information, visit www.conformis.com.

Cautionary Statement Regarding Forward-Looking Statements

Any statements in this press release about future expectations, plans and prospects for ConforMIS, including statements about the potential clinical benefits or other impacts and advantages of using customized implants, as well as other statements containing the words “anticipate,” “believe,” “continue,” “could,” “estimate,” “expect,” “intend,” “may,” “might,” “plan,” “potential,” “predict,” “project,” “should,” “target,” “will,” or “would” and similar expressions, constitute forward-looking statements within the meaning of the safe harbor provisions of The Private Securities Litigation Reform Act of 1995. We may not actually achieve the plans, intentions or expectations disclosed in our forward-looking statements, and you should not place undue reliance on our forward-looking statements. Actual results or events could differ materially from the plans, intentions and expectations disclosed in the forward-looking statements we make as a result of a variety of risks and uncertainties, including risks related to our clinical studies, and the other risks and uncertainties described in the “Risk Factors” sections of our public filings with the Securities and Exchange Commission. In addition, the forward-looking statements included in this press release represent ConforMIS’s views as of the date hereof. ConforMIS anticipates that subsequent events and developments may cause ConforMIS’s views to change. However, while ConforMIS may elect to update these forward-looking statements at some point in the future, ConforMIS specifically disclaims any obligation to do so. These forward-looking statements should not be relied upon as representing ConforMIS’s views as of any date subsequent to the date hereof.

CONTACT:

Kelly Wakelee
kwakelee@berrypr.com
(212)-253-8241

Investor Contact:
Oksana Bradley
ir@conformis.com
(781) 374-5598

A photo accompanying this announcement is available at http://www.globenewswire.com/NewsRoom/AttachmentNg/728a786b-f59f-4fb5-947c-5e772c9ea94f

A photo accompanying this announcement is available at http://www.globenewswire.com/NewsRoom/AttachmentNg/0a97a95b-0207-4472-8c47-59d8a3b3b3ba

A photo accompanying this announcement is available at http://www.globenewswire.com/NewsRoom/AttachmentNg/cb3cb524-e1b7-4e82-a02a-4d4dadbc0177

 

WishBone Medical, Inc. Names Andrew J. Miclot as President

Warsaw, Indiana, January 4, 2018 — WishBone Medical, Inc., a new global pediatric orthopedic company, committed to providing anatomically appropriate innovative implants in sterile packed, single-use disposable kits, announces that Andrew “Andy” J. Miclot has taken on the role of President and will continue in his role as Vice Chairman and Director on the WishBone Medical Board of Directors.

Mr. Miclot is a seasoned executive with almost 40 years of global Medical Device experience. He has been President and CEO of several Medical Device Companies with executive leadership positions, put together world-class management teams and completed and integrated acquisitions globally. He has had success in early stage and in Fortune 500 companies turning around unprofitable and growing primarily Orthopedic and ENT companies. Early experience included growing sterile packed, single-use, disposable kit Medical Device companies.

He is joining WishBone Medical after turning around Micro Machine as President and CEO, an orthopedic company with offices in Warsaw, IN and Kalamazoo MI.  Recent experience includes General Manager ENT /Senior Vice President and Officer of ArthroCare where he increased annual revenue from flat to three years of double digit growth generating 33% of the revenue and 50% of the profit for the entire company.

Andrew was President/CEO and Director of Ascension Orthopedics delivering 15% increase the first year, after two consecutive years of flat sales. He was Senior Vice President of Orthofix where he propelled revenue by 15% in orthopedics that included trauma and external fixation products.

As Senior Vice President/Officer and IRO, he propelled Symmetry Medical, for over thirteen years, from a $10 million breakeven medical device company to $300 million and was key in the NYSE IPO raising $120 million, surpassing Wall Street expectations and generating $220 million via a secondary offering. Other Medical Device Supplier experience included the Executive Vice President of Micro Technologies.

He was Director of Medical Products at DePuy Orthopedics, driving revenues from $64 to $80 million. Responsibilities included trauma, sports medicine, surgical instruments and customs for spine, knee, shoulder, foot, trauma and hip Products. Prior to DePuy, he had several Marketing and Sales leadership positions at Zimmer for over five years in three Divisions; Patient Care, Hall Surgical and Trauma.

Early experience includes: Vice President of Ulti-Med, disposable products for the US and Asia, Medline, as the youngest Director, disposable textile and Custom Sterile Procedure Trays, DeRoyal, Sales Manager with orthopedic soft goods and Custom Sterile Procedure Trays and American Hospital Supply/Hospitex, Sales Manager that turned around a territory ranked worst of 50 to number three in two years and then promoted to Sales Trainer.

Nick Deeter, WishBone Medical’s Founder, Chairman and CEO commented, “We are delighted       that Andy is joining WishBone Medical as Global President. He has extensive and relevant global leadership experience in Orthopedics and with single-use, sterile Medical Devices and a strong record of success. Andy will also remain as the Vice Chairman and Director of WishBone Medical’s Board of Directors and we appreciate his guidance over the last year.”

Andy currently serves on three Boards; WishBone Medical as Vice Chairman and Director, Micro Machine as Director and Precision Optics as Director (Public Company). Also, he is on two Advisory Boards; Indiana University Arts and Sciences Alumni Board and ODT (Orthopedic Design and Technology). He was one of a small group of Founders in “The Institute of Orthopaedic Enlightenment” started by Knowledge Enterprises. He has been key note speakers and panel discussion leaders at several Orthopedic and ENT conferences.

He has a BA in Speech and Hearing Sciences and an MA in Audiology from Indiana University, and an MBA from Lake Forest Graduate School of Management.

About WishBone Medical, Inc.

WishBone Medical, a Global pediatric orthopedic company, is committed to providing anatomically appropriate innovative implants and instruments in sterile packed, single use, disposable kits, to prevent infection, reduce overall costs for our customers and achieve the best outcomes for children around the world who are still growing.

For more information, contact Andrew Miclot, Vice Chairman and President, at 574-306-4006 or email CustomerService@WishBoneMedical.com

NuVasive Extends First-Of-Its-Kind Porous PEEK Interbody To TLIF And PLIF Procedures

SAN DIEGOJan. 4, 2018 /PRNewswire/ — NuVasive, Inc. (NASDAQ: NUVA), the leader in spine technology innovation, focused on transforming spine surgery with minimally disruptive, procedurally-integrated solutions, announced today the launch of the Company’s COALESCETM Thoracolumbar Interbody Fusion Device as well as FDA 510(k) clearance for expanded indications of its COHERE® Cervical Interbody Fusion Device. The launch and updated claims follow the NuVasive September 2017 acquisition of Vertera Spine, developers of highly innovative interbody implants for spinal fusion using patented porous polyetheretherketone (PEEK) technology.

The NuVasive Advanced Materials Science (AMS) Portfolio includes Porous PEEK™ and Modulus® Titanium interbody implants that are engineered for enhanced osseointegration and biomechanical properties when compared to solid implants with smooth or rough surfaces. Based on animal studies, COALESCE and COHERE provide a unique three-dimensional Porous PEEK architecture to help elicit and encourage bone ingrowth. The technology used to develop these devices utilizes a proprietary processing method that introduces porous structure without compromising implant strength.

“Our strategy in building our AMS portfolio is to provide unprecedented, innovative technologies that enhance the surface, structure and visualization properties of these implants,” said Gregory T. Lucier, chairman and chief executive officer of NuVasive. “Our launch of COALESCE and the expanded clearance of COHERE and COALESCE are all part of our continued commitment to bring disruptive technology to market and investment into our comprehensive AMS portfolio, which converge to provide a better surgical experience and improve patient quality of life.”

COALESCE is now commercially available for TLIF and PLIF procedures in multiple footprint, height and lordotic options, and is magnetic resonance compatible. Following its recently cleared 510(k), COALESCE indications have been expanded to include use for one or two adjacent levels in the thoracolumbar spine (T1– S1) with both autograft and allograft for treatment of degenerative disc disease and degenerative spondylolisthesis as well as multi-level degenerative scoliosis. The device previously received FDA 510(k) clearance for use in anterior, transforaminal, posterior and lateral lumbar interbody fusion procedures.

The expanded FDA 510(k) indications for COHERE allow it to be used at multiple levels in the cervical spine (C2 – T1) with both autograft and allograft. In addition, COHERE received a new ICD code from the Center of Medicare & Medicaid Services (CMS) in October. COHERE is the only product approved for use with the new code, signifying CMS’ recognition of the innovation and potential clinical and tracking benefits of using Porous PEEK technology.

“Patients can gain significant pain relief and improved functional outcomes through the stabilization and fusion of the degenerated spinal motion segment,” said Dr. Kenneth Burkus, orthopaedic surgeon at The Hughston Clinic. “COHERE and COALESCE contribute to these outcomes by retaining the biomechanical properties necessary for intradiscal spinal applications, while helping facilitate osseointegration and bone growth. The use of these new Porous PEEK implants may enhance fusion and limit the risk of stress-shielding, subsidence and implant failure.”

About NuVasive
NuVasive, Inc. (NASDAQ: NUVA) is the leader in spine technology innovation, focused on transforming spine surgery and beyond with minimally disruptive, procedurally-integrated solutions designed to deliver reproducible and clinically-proven surgical outcomes. The Company’s portfolio includes access instruments, implantable hardware, biologics, software systems for surgical planning, navigation and imaging solutions, magnetically adjustable implant systems for spine and orthopedics, and intraoperative monitoring service offerings. With $962 million in revenues (2016), NuVasive has an approximate 2,300 person workforce in more than 40 countries serving surgeons, hospitals and patients. For more information, please visit www.nuvasive.com.

Forward-Looking Statements
NuVasive cautions you that statements included in this news release that are not a description of historical facts are forward-looking statements that involve risks, uncertainties, assumptions and other factors which, if they do not materialize or prove correct, could cause NuVasive’s results to differ materially from historical results or those expressed or implied by such forward-looking statements. The potential risks and uncertainties which contribute to the uncertain nature of these statements include, among others, risks associated with acceptance of the Company’s surgical products and procedures by spine surgeons, development and acceptance of new products or product enhancements, clinical and statistical verification of the benefits achieved via the use of NuVasive’s products (including the iGA® platform), the Company’s ability to effectually manage inventory as it continues to release new products, its ability to recruit and retain management and key personnel, and the other risks and uncertainties described in NuVasive’s news releases and periodic filings with the Securities and Exchange Commission. NuVasive’s public filings with the Securities and Exchange Commission are available at www.sec.gov. NuVasive assumes no obligation to update any forward-looking statement to reflect events or circumstances arising after the date on which it was made.

 

SOURCE NuVasive, Inc.

Related Links

http://www.nuvasive.com

AngelMD Investor Group Closes Funding Round in Articulus Bio, LLC

AngelMD, a platform that connects medial startups with doctors that provide guidance and investors that provide funding, today announced that its group of physician and investor members has completed a funding round for Articulus Bio, LLC. Articulus Bio is a seed-stage orthopedic medical device company focused on total ankle replacement (TAR). The (patent-pending) Articulus Bio technology takes a unique engineering approach toward solving the problems behind the majority of total joint replacement failures.

While total joint replacement surgeries are seen as a rousing success in the world of orthopedics, they are not without their own issues. Approximately one million hip and knee replacement procedures are performed each year and as many as 50,000 of these cases will likely fail within 10 years. Ankle joint failure rates are considerably more prevalent than the hip and knee, and some ankle devices may have failure rates as high as 40 percent within five to ten years.

The first area of focus for Articulus Bio is to address the wear debris issue — either metal on metal or metal on plastic — caused by friction occurring at the articulating faces of joint surfaces. These wear particles circulate through the body and often cause an immunological response known as osteolysis. The debris “eats away” where the implant junction interfaces with the body, causing a loosening of the implant that ultimately leads to the need for a revision surgery.

“It has been a privilege to collaborate with AngelMD on advancing our Tendonoid™ Web Joint technology,” said Adam Rubenstein, CEO of Articulus Bio. “Our mission is to improve outcomes and quality of life for total joint replacement patients. That requires access to capital, but for us, it’s just as essential to engage the intellectual and technical horsepower of the orthopedic surgeon community to help guide our development. AngelMD played an invaluable role in facilitating these pivotal relationships for us while assisting raising the capital we needed.”

While the Articulus Bio team remains focused on the development of their TAR product, the company has a parallel goal of deploying their platform-based Tendonoid™ Web Joint System across a host of large and small joint sites. The technology utilizes a novel configuration of the previously FDA approved Ultra High Molecular Weight Polyethylene (UHMWPE) biomaterial spun into the Tendonoid Web Joint System structure. The Tendonoid Web Joint System is designed to reduce/eliminate friction/grinding at the articulating joint faces that are observed in prior generations of devices. When the friction/grinding is reduced/eliminated, so too is the wear debris.

“In conversations with physicians and industry experts focused on Total Ankle Replacements, the feedback on the design of this new generation of TAR shows potential for a substantial leap forward in improving patient outcomes and reducing complication,” said Mark Mescher, Sr. Vice President of Professional Relations for AngelMD.

The team is raising capital in order to address specific seed-stage milestones that, on the other side of completion, will inject material value into the company. First they will capture performance data of the Tendonoid™ sub-assembly components. Second, they will prepare and submit a Q-Sub meeting package to FDA and receive regulatory pathway guidance from the agency. Finally, they will continue to build out their intellectual property portfolio.

The goal of Articulus Bio, as the future takes shape, is to take what the company learns from their TAR cases and apply it to many other large and small joints throughout the body. This should allow for total joint replacement surgeries, without the risk of wear debris, to become as commonplace as those performed on hips.

About AngelMD 
AngelMD is an investment and networking platform connecting innovative medical startups, physicians, investors, and industry partners. Leading physicians from all over the US have joined AngelMD to help source, evaluate and advise companies in biotechnology, medical device, and healthcare technology. For more information, visit http://www.angelmd.co.

About Articulus Bio, LLC 
Articulus Bio, LLC is a seed-stage orthopedic medical device company focused on total ankle replacement (TAR). The (patent-pending) Articulus Bio technology takes a unique engineering approach toward solving the problems behind the majority of total joint replacement failures.

Horizon Technology Finance Provides $12 Million Venture Loan to Conventus Orthopaedics

FARMINGTON, Conn. and MAPLE GROVE, Minn.Jan. 2, 2018 /PRNewswire/ — Horizon Technology Finance Corporation (NASDAQ: HRZN) (“Horizon”) (“Company”), a leading specialty finance company that provides capital in the form of secured loans to venture capital backed companies in the technology, life science, healthcare information and services, and cleantech industries, announced today that it closed a $12 million venture loan to Conventus Orthopaedics, Inc. (“Conventus”) on December 22, 2017. Conventus will use the proceeds for general working capital purposes.

Conventus is a medical device company developing a proprietary nitinol “Cage” technology for treatment of periarticular fractures. The Conventus Cage™ fracture repair solution is designed to offer patients and surgeons an improvement over traditional techniques by providing intramedullary support. Backed by top investors including Deerfield Management and SightLine Partners, the Cage technology has been well received by orthopedic surgeons and their patients.

“We are very pleased to provide this venture loan to Conventus,” said Gerald A. Michaud, President of Horizon. “The company’s 3-dimensional fracture management system enables surgeons to provide robust, stable surgical repair and return patients to their normal lives. With this financing, Conventus will continue to commercialize its proximal humerus fracture fixation therapy while developing further indications for this technology.”

Matthew Jewett, CEO and President of Conventus, stated, “We are excited to have the support of a first class healthcare investor like Horizon as we accelerate the expansion of the Conventus Cage technology with the upcoming launch of our next generation proximal humerus (PH) system. This growth capital will enable us to expand our commercial efforts and bring our technology to more surgeons and ultimately help more patients.”

About Horizon Technology Finance
Horizon Technology Finance Corporation is a leading specialty finance company that provides capital in the form of secured loans to venture capital backed companies in the technology, life science, healthcare information and services, and cleantech industries. The investment objective of Horizon is to maximize its investment portfolio’s return by generating current income from the debt investments it makes and capital appreciation from the warrants it receives when making such debt investments. Headquartered in Farmington, Connecticut, Horizon has regional offices in Pleasanton, CaliforniaReston, Virginia and Boston, Massachusetts. Horizon’s common stock trades on the NASDAQ Global Select Market under the ticker symbol “HRZN”. To learn more, please visit www.horizontechfinance.com.

About Conventus Orthopaedics
Conventus Orthopaedics, Inc. is an early-stage company focused on delivering a new standard of care for orthopedic fracture treatment, including complex and fragility fractures where there is a significant unmet need and a lack of treatment options. Their proprietary Cage™ technology aims to improve patient outcomes, enhance the surgeon experience, and deliver economic value to stakeholders within this market segment. To learn more, please visit www.conventusortho.com.

Forward-Looking Statements
Statements included herein may constitute “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. Statements other than statements of historical facts included in this press release may constitute forward-looking statements and are not guarantees of future performance, condition or results and involve a number of risks and uncertainties. Actual results may differ materially from those in the forward-looking statements as a result of a number of factors, including those described from time to time in our filings with the Securities and Exchange Commission. Horizon undertakes no duty to update any forward-looking statement made herein. All forward-looking statements speak only as of the date of this press release.

Contact:

Horizon Technology Finance

Investor Relations and Media Contacts:

Daniel R. Trolio

The IGB Group

Chief Financial Officer

Scott Eckstein / Leon Berman

(860) 674-9977

(212) 477-8261 / (212) 477-8438

dtrolio@horizontechfinance.com

seckstein@igbir.com / lberman@igbir.com

 

SOURCE Horizon Technology Finance Corporation

Related Links

http://www.horizontechfinance.com