MiMedx Board of Directors Authorizes $10 Million Increase to the Company’s Share Repurchase Program

MARIETTA, Ga.Oct. 9, 2017 /PRNewswire/ — MiMedx Group, Inc. (NASDAQ: MDXG), the leading biopharmaceutical company developing and marketing regenerative and therapeutic biologics utilizing human placental tissue allografts and patent-protected processes for multiple sectors of healthcare, announced today the decision of its Board of Directors to authorize a $10 million increase in the Company’s Share Repurchase Program.

This action by the MiMedx Board of Directors authorizing the additional $10 million to the Company’s Share Repurchase Program brings the total authorized to $110 million since the Share Repurchase Program commenced in May 2014. The Company reported that in light of the short seller attacks and its strong balance sheet and cash flows, the MiMedx Board of Directors believes the stock repurchases continue to be an extremely positive investment for MiMedx.  The Board also agreed to review this program again at its scheduled meeting on October 26, 2017, and to consider an additional commitment at that time.

Parker H. “Pete” Petit, Chairman and CEO, stated, “To date, we have utilized virtually all of the $100 million previously authorized by the Board. This program has been particularly beneficial for the Company, as we have acquired shares at very low prices for a company with our level of sustained growth, biopharma strategy, outstanding clinical trials, the consistent pattern of physician and payer reception in the market place and our robust pipeline of future products. The recent deceptive and contrived attacks on our stock have caused the MiMedx shares to become very undervalued in my opinion. I believe it is a very prudent use of our capital to acquire our shares at this point, and our high growth profile in both revenues and profits should produce an extremely anti-dilutive result from our stock repurchases.”

“We share the frustration from the short selling activity with all of our shareholders, and we are aggressively pursuing avenues that will expose these illegal activities,” concluded Petit.

About MiMedx

MiMedx® is the leading biopharmaceutical company developing and marketing regenerative and therapeutic biologics utilizing human placental tissue allografts with patent-protected processes for multiple sectors of healthcare. “Innovations in Regenerative Medicine” is the framework behind our mission to give physicians products and tissues to help the body heal itself.  We process the human placental tissue utilizing our proprietary PURION® Process among other processes, to produce safe and effective allografts.   MiMedx proprietary processing methodology employs aseptic processing techniques in addition to terminal sterilization.  MiMedx is the leading supplier of placental tissue, having supplied over 1,000,000 allografts to date for application in the Wound Care, Burn, Surgical, Orthopedic, Spine, Sports Medicine, Ophthalmic and Dental sectors of healthcare. For additional information, please visit www.mimedx.com.

Important Cautionary Statement

This press release includes forward-looking statements, including statements regarding the Company’s stock repurchases are a positive investment for the Company and a prudent use of the Company’s capital, the belief that the Company’s stock price is very undervalued at present,  the Company’s expectations to continue the use of the share repurchase program to enhance shareholder value.  These statements also may be identified by words such as “believe,” “except,” “may,” “plan,” “potential,” “will” and similar expressions, and are based on our current beliefs and expectations. Forward-looking statements are subject to significant risks and uncertainties, and we caution investors against placing undue reliance on such statements.  Actual results may differ materially from those set forth in the forward-looking statements. Among the risks and uncertainties that could cause actual results to differ materially from those indicated by such forward-looking statements include that the stock repurchases may not be a positive investment or a prudent use of the Company’s capital, the Board may not consider a substantial new commitment to the share repurchase program at its October 26, 2017 meeting, the Company’s stock price may not be undervalued, the Company’s continued use of the share repurchase program may not enhance shareholder value or the Company may not continue to use the share repurchase program.  For more detailed information on the risks and uncertainties, please review the Risk Factors section of our most recent annual report or quarterly report filed with the Securities and Exchange Commission.  Any forward-looking statements speak only as of the date of this press release and we assume no obligation to update any forward-looking statement.

SOURCE MiMedx Group, Inc.

Related Links

http://www.mimedx.com

Mazor Robotics Received 22 System Orders During Q3 2017; Expects to Report Record Quarterly Revenue

October 09, 2017

CAESAREA, Israel–(BUSINESS WIRE)–Mazor Robotics Ltd. (TASE: MZOR; NASDAQGM: MZOR), a pioneer and a leader in the field of surgical robotic systems, expects to report record revenue of approximately $17.2 million for the third quarter ended September 30, 2017. During the third quarter of 2017, the Company received a total of 22 system purchase orders from customers in the U.S., Asia and Israel. The 22 orders are comprised of:

  • 19 purchase orders for the Mazor X™ system, of which 11 were ordered by Medtronic. As of September 18, 2017, Medtronic assumed full responsibility for the distribution of the Mazor X system, as part of the second phase of the commercial agreement between the companies. Five of the Medtronic ordered systems were delivered in Q3.
  • A purchase order for three Renaissance systems from the Company’s distribution partner in China, one of which was delivered in Q3.

“This quarter we transferred to Medtronic members of our talented capital sales team along with a solid sales pipeline. This transition was performed in a smooth and effective manner and we maintained robust sales activity during the transition period,” commented Ori Hadomi, Chief Executive Officer. “The continued strong performance in the third quarter of 2017 reflects the increased demand and interest in Mazor’s robotic platforms.”

Mazor’s system backlog at the end of the third quarter was 17 systems (15 Mazor X and two Renaissance systems). The Company intends to report its financial results for the third quarter ended September 30, 2017 on or about November 7, 2017 and will issue a press release with the specific time, dial-in credentials and webcast details.

About Mazor

Mazor Robotics (TASE: MZOR; NASDAQGM: MZOR) believes in healing through innovation by developing and introducing revolutionary robotic technologies and products aimed at redefining the gold standard of quality care. Mazor Robotics Guidance Systems enable surgeons to conduct spine and brain procedures in an accurate and secure manner. For more information, please visit www.MazorRobotics.com.

Forward-Looking Statements

This press release contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995 and other securities laws. Any statements in this release about future expectations, plans or prospects for the Company, including without limitation, statements regarding the expected revenue for the third quarter of 2017, the amount of recording of additional revenue from backlog, the timing of reporting of third quarter financial results, and other statements containing the words “believes,” “anticipates,” “plans,” “expects,” “will” and similar expressions are forward-looking statements. These statements are only predictions based on Mazor’s current expectations and projections about future events. There are important factors that could cause Mazor’s actual results, level of activity, performance or achievements to differ materially from the results, level of activity, performance or achievements expressed or implied by the forward-looking statements. Those factors include, but are not limited to, the impact of general economic conditions, competitive products, product demand and market acceptance risks, reliance on key strategic alliances, fluctuations in operating results, and other factors indicated in Mazor’s filings with the Securities and Exchange Commission (SEC) including those discussed under the heading “Risk Factors” in Mazor’s annual report on Form 20-F filed with the SEC on May 1, 2017 and in subsequent filings with the SEC. For more details, refer to Mazor’s SEC filings. Mazor undertakes no obligation to update forward-looking statements to reflect subsequent occurring events or circumstances, or to changes in our expectations, except as may be required by law.

Contacts

EVC Group
Investors
Michael Polyviou, 212-850-6020
mpolyviou@evcgroup.com
or
Doug Sherk, 646-445-4800
dsherk@evcgroup.com

Nanovis Spine Featured in Orthopedic Design and Technology

Nanovis Spine CEO Matt Hedrick recently sat down to speak with ODT about our commitment to developing innovative products to improve patient care and outcomes (full article attached).

https://www.odtmag.com/issues/2017-10-01/view_features/distinguished-support-a-review-of-spinal-orthopedic-technologies/?sthash.APN1XgvK.mjjo

“With an approximately 10 percent rate of lumbar non-fusions, we feel this area is where we can do the most good. Nanovis’ deeply porous titanium scaffolded FortiCore implant systems provide high fixation strength in a short timespan compared to PEEK, plasma-sprayed PEEK, or allograft…” Hedrick said.

The advantages of FortiCore® include:

#deeply porous interconnected titanium scaffold

#intermolded PEEK-Optima® core by InVibio with benefits of modulus and imaging

#resistance to abrasion and delamination (rebar in concrete concept)

#published pre-clinical data showing statistically significant superiority vs. PEEK, Allograft, and Plasma Spray https://lnkd.in/eDjfMaR

“Our next technology upgrade for this market is a patented nanotube surface that offers the potential to further enhance the interface with bone that our entire line of spinal implants offers surgeons. Combining these technologies provides Nanovis and our distributor partners an entire portfolio of highly-advanced and highly-differentiated products.”

Nanovis is actively recruiting independent distributors to give more patients, physicians, and providers access to our science enhanced, meaningfully differentiated technology platforms.

To learn more, please contact jeff.shepherd@nanovistechnology.com, or visit us at Booth# 762 at the North American Spine Society meeting October 25-28, 2017 in Orlando.

 

 

Stryker’s 3D-Printed Tritanium® C Anterior Cervical Cage To Be Featured at Congress of Neurological Surgeons Meeting

October 09, 2017

ALLENDALE, N.J.–(BUSINESS WIRE)–Stryker’s Spine division will demonstrate its new 3D-printed Tritanium C Anterior Cervical Cage, an interbody fusion device designed for use in the cervical spine, at the Congress of Neurological Surgeons (CNS) Annual Meeting, Oct. 7-11, 2017, in Boston (booth No. 311).

The Tritanium C Anterior Cervical Cage is the latest spinal fusion implant constructed from Stryker’s proprietary Tritanium In-Growth Technology,1 a novel, highly porous titanium material designed for bone in-growth and biological fixation.1

The unique porous structure of Tritanium is created to provide a favorable environment for cell attachment and proliferation, as demonstrated in an in-vitro study.2* The Tritanium material may be able to wick or retain fluid, in comparison to traditional titanium.3 Tritanium is inspired by the microstructure of cancellous bone4 and enabled by AMagine™, Stryker’s proprietary approach to implant creation using additive manufacturing, also known as 3D printing.

“We look forward to showcasing the Tritanium C Anterior Cervical Cage and demonstrating its advanced capabilities at the CNS meeting,” said Bradley Paddock, President of Stryker’s Spine division. “Stryker’s Tritanium Technology is ‘engineered for bone.’ Our growing line of Tritanium implants reflects our commitment to being at the forefront of technology advances in spinal surgery, and to providing our surgeon customers with a range of options to address their preferences and meet the needs of their patients.”

According to Mohammed Faraz Khan, M.D., Hackensack University Medical Center, N.J., one of the first surgeons to use the new cage, the benefits of the Tritanium C Anterior Cervical Cage are clear. “In my opinion, this new addition is going to make all the difference in this space,” Khan said. “The inserter used with the system was super sleek and easy to use.”

The Tritanium C Anterior Cervical Cage received 510(k) clearance from the U.S. Food and Drug Administration in September 2017 and will be available to surgeons in Q4 2017. It features an open central graft window and lateral windows to help reduce stiffness of the cage and minimize subsidence. In addition, the large graft window allows for bone graft containment. Engineered for stability,5 the cage has serrations on the superior and inferior surfaces designed to allow for bidirectional fixation and to maximize surface area for endplate contact with the cage. Its smooth posterior edges help to facilitate insertion and to protect soft tissue and anatomy. The Tritanium C Anterior Cervical Cage is offered in a number of footprints, heights, and lordotic angles to adapt to a variety of patient anatomies.

About Stryker

Stryker is one of the world’s leading medical technology companies and, together with its customers, is driven to make healthcare better. The company offers innovative products and services in Orthopaedics, Medical and Surgical, and Neurotechnology and Spine that help improve patient and hospital outcomes. More information is available at www.stryker.com.

References

1. PROJ43909 Tritanium technology claim support memo
2. RD0000053710: Tritanium cell infiltration and attachment experiment
*No correlation to human clinical outcomes has been demonstrated or established
3. RD0000050927: Tritanium material capillary evaluation
4. Karageorgiou V, Kaplan D. Porosity of 3D biomaterial scaffolds and osteogenesis. Biomaterials, 26, 5475-5491
5. PROJ44960: Coefficient of friction memo

Content ID: TRICC-PR-2_15699

A surgeon must always rely on his or her own professional clinical judgment when deciding whether to use a particular product when treating a particular patient. Stryker does not dispense medical advice and recommends that surgeons be trained in the use of any particular product before using it in surgery.

The information presented is intended to demonstrate the breadth of Stryker product offerings. A surgeon must always refer to the package insert, product label and/or instructions for use before using any Stryker product. Products may not be available in all markets because product availability is subject to the regulatory and/or medical practices in individual markets. Please contact your Stryker representative if you have questions about the availability of Stryker products in your area.

Contacts

Sullivan & Associates
Barbara Sullivan, 714/374-6174
bsullivan@sullivanpr.com

Synaptive Medical Unveils Next Generation of Surgical Robotics with Groundbreaking Optics Platform

October 9, 2017

TORONTO–(BUSINESS WIRE)–Synaptive Medical Inc., a medical device and technology company, today released Modus V™. This second-generation, high-powered digital microscope with a surgical robotic arm is derived from Canadarm technology used on the International Space Station. Designed with feedback from Synaptive’s clinical partners, Modus V is the new cornerstone of its integrated BrightMatter™ platform.

Modus V sets the new standard for robot-assisted neurosurgery with the most powerful optics available on the market that give unprecedented views of patient anatomy and may allow surgeons to perform less invasive procedures with more precision. For patients, less invasive procedures may lead to faster recovery times, reduced complications and, in some cases, may render an inoperable diagnosis operable.

For surgeons, Modus V’s advanced instrument tracking with auto-focus, combined with a highly flexible arm, also allows for increased surgical efficiency through hands-free control, better ergonomics during procedures and greater versatility in the operating room. These innovations feed developments in precision medicine by creating more opportunity to capture, analyze and draw trends from patient data and build better decision-making tools for physicians, researchers and hospital administrators.

“This product release marks a major milestone in our evolution as a company,” says Peter Wehrly, Synaptive’s CEO. “Modus V is an integral part of our overall BrightMatter surgical solution. Conceptualized for the digital era as a fully integrated set of devices, our solution collects and delivers data—be it imaging, tractography or other patient information—when and where it’s most needed to drive surgical decision making. It’s part of our ongoing commitment to give surgeons the most advanced tools with which to treat their patients.”

Modus V is part of the BrightMatter product suite, which transforms surgical planning, patient data collection and intraoperative vision from disjointed analog methods to a fully integrated platform with navigation, robotic automation, digital microscopy and data analytics.

As the successor to BrightMatter Drive, Synaptive’s first generation robotic digital microscope, Modus V’s improved design was created to meet the complex needs of cutting-edge surgery, including:

  • The most powerful optics platform on the market fully integrated with the robotic arm, providing superior visualization of anatomy and allowing for better decision making when it matters most
  • Enhanced hands-free tracking of surgical instruments with auto-focus and programmable motions gives surgeons more control without disrupting workflow
  • Increased arm flexibility covers a larger volume of space, permitting more versatile positioning around the patient and ergonomic alignments of optics for the surgeon
  • Smaller unit footprint allows for greater maneuverability in the OR and enables faster deployment

“Collaboration is hardwired into Synaptive’s culture. Modus V’s improvements are grounded in the collaboration and extensive feedback from neurosurgeons in our customer community on both Modus V prototypes and BrightMatter Drive,” says Cameron Piron, Synaptive’s president and chief strategy officer. “We’re grateful for their support, and look forward to deeper commentary from the surgical community as Modus V enters the market.”

About Synaptive Medical | Synaptive Medical Inc., a Toronto-based medical device and technology company, collaborates with leading clinicians and healthcare systems to revolutionize products and services that cross traditional barriers to enable continuous improvement in care delivery in and beyond the operating room. Synaptive’s integrated BrightMatter™ solutions—including surgical planning, navigation and visualization, and an informatics platform—are designed to give clinicians the right information they need to ensure the best possible outcomes for patients.

Contacts

Synaptive Medical
Elizabeth Monier-Williams, 647-299-6429
Director, Marketing Communications
elizabeth.monierwilliams@synaptivemedical.com

SI-BONE, Inc. Announces Utah’s PEHP Coverage for the iFuse Procedure™ for MIS SI Joint Fusion

SAN JOSE, Calif.Oct. 9, 2017 /PRNewswire/ — SI-BONE, Inc., an innovative medical device company that pioneered the use of the iFuse Implant System® (iFuse), a triangular-shaped minimally invasive surgical (MIS) device indicated for fusion for certain disorders of the sacroiliac (SI) joint, announced that PEHP Health & Benefits of Utah, a nonprofit trust providing health benefits to Utah’s public sector employees and their families, has issued a positive coverage policy for MIS SI joint fusion with iFuse.  The policy specifies positive coverage for MIS SI joint fusion using iFuse with prior authorization for CPT (current procedural terminology) code 27279 and considers open SI joint fusion with CPT 27280 experimental and investigational.  In addition, the policy considers percutaneous radiofrequency ablation/denervation of the SI joint, including pulsed, non-pulsed and cooled, experimental and investigational.

“Minimally invasive SI joint fusion using the iFuse Implant has become the method of choice to treat patients who suffer from chronic pain resulting from degenerative sacroiliitis or sacroiliac joint disruption.  With over 28,000 procedures performed and 54 peer-reviewed publications that include two Level 1 randomized controlled trials as well as numerous long-term studies including a 6-year study published in Neurosurgery, the iFuse Implant is the benchmark for SI joint fusion,” said Jeffrey Dunn, President, Chairman and CEO at SI-BONE.  “It’s very encouraging to see health plans such as PEHP of Utah provide access to the iFuse Procedure™ for its health plan members who are suffering from chronic SI joint pain who’ve failed conservative care.”

About SI joint dysfunction

The SI joint has been attributed as a source of pain in 15-30 percent of patients with chronic low back pain1-4, and in up to 43 percent of patients with new onset or persistent low back pain after lumbar fusion.5 Like all other major joints, the SI joint can be injured or degenerate, which can cause debilitating pain in the lower back, buttocks and legs.  Simple movements such as standing up, sitting down, stepping up or down, bending and lifting, walking, or even sleeping or sitting on the affected side can provoke a symptomatic SI joint.

SI joint dysfunction is often misdiagnosed and the resulting pain can be misattributed to other causes.  Not all healthcare providers evaluate the SI joint and many patients do not know to ask about it. While not commonly diagnosed, SI joint disorders can be identified when a patient points to their source of pain directly over the posterior superior iliac spine (PSIS) known as the Fortin Finger Test, combined with a number of positive provocative maneuvers to stress the SI joint and elicit the pain, followed by image-guided diagnostic injections.

The other major joints in the human body, such as knees, hips, ankles and shoulders, have specialized device-based surgical solutions.  The SI joint is the largest and the last of eight major joints in the human body to have a proven surgical solution.  The iFuse Implant™ was designed specifically to withstand the extreme forces resulting from load-bearing and the unique rotational and translational motion of the SI joint referred to as nutation, and is supported by more than 50 peer-reviewed publications including two Level 1 randomized controlled trials.

About SI-BONE, Inc.

SI-BONE, Inc. (San Jose, California) is a leading medical device company that has developed the iFuse Implant System, a proprietary minimally invasive surgical implant system to fuse the sacroiliac joint to treat common disorders of the joint that can cause lower back pain.  Patients with sacroiliac joint dysfunction experience pain that can be debilitating.  SI-BONE believes that the sacroiliac joint is the last of the eight major joints in the human body to have a proven surgical treatment and that the iFuse Implant, first FDA-cleared in 2009, is the only device for treatment of SI joint dysfunction supported by significant published clinical evidence, including level 1 trials, showing safety and durable effectiveness, including providing lasting pain relief.

The iFuse Implant System is intended for sacroiliac fusion for conditions including sacroiliac joint dysfunction that is a direct result of sacroiliac joint disruption and degenerative sacroiliitis.  This includes conditions whose symptoms began during pregnancy or in the peripartum period and have persisted postpartum for more than 6 months.  There are potential risks associated with the iFuse Implant System.  It may not be appropriate for all patients and all patients may not benefit.  For information about the risks, visit: www.si-bone.com/risks

CPT is a registered trademark of the American Medical Association. The AMA assumes no liability for data contained or not contained herein.

SI-BONE and iFuse Implant System are registered trademarks of SI-BONE, Inc. iFuse Implant and iFuse Procedure are trademarks of SI-BONE, Inc.  ©2017 SI-BONE, Inc. All Rights Reserved. 10004.100917

  1. Bernard TN, Kirkaldy-Willis WH. Recognizing specific characteristics of nonspecific low back pain. Clin Orthop Relat Res. 1987;217:266–80.
  2. Schwarzer AC, Aprill CN, Bogduk N. The Sacroiliac Joint in Chronic Low Back Pain. Spine. 1995;20:31–7.
  3. Maigne JY, Aivaliklis A, Pfefer F. Results of Sacroiliac Joint Double Block and Value of Sacroiliac Pain Provocation Tests in 54 Patients with Low Back Pain. Spine. 1996;21:1889–92.
  4. Sembrano JN, Polly DW Jr. How Often is Low Back Pain Not Coming From The Back? Spine. 2009;34:E27–32.
  5. DePalma M, Ketchum JM, Saullo TR. Etiology of Chronic Low Back Pain Patients Having Undergone Lumbar Fusion. Pain Med. 2011;12:732–9.

SOURCE SI-BONE, Inc.

Related Links

http://www.si-bone.com

BONESUPPORT™ – First Patient Recruited in Study Evaluating CERAMENT® G and CERAMENT® V in Patients Undergoing Hip and Knee Arthroplasty Revisions

Lund, Sweden, 08:00 CEST 9 October 2017 – BONESUPPORT™ an emerging leader in innovative injectable bio-ceramic bone substitute products to treat bone voids caused by trauma, infection, disease or related surgery based on its unique CERAMENT® platform announces that the first patient has been recruited in a study evaluating CERAMENT® G and CERAMENT® V in patients undergoing hip and knee arthroplasty revisions. Professor Carlo Romanò is the Principal Investigator for the study, which will take place at 6 different clinical centers in Italy and is expected to recruit approximately 135 patients.

The investigator-led study is an open-label, prospective cohort, observational clinical trial designed to evaluate the effectiveness and safety of CERAMENT G or CERAMENT V when used to fill bone defects in the tibia and/or femur shaft and/or acetabulum in patients scheduled for two-stage hip or knee prosthesis re-implantation for periprosthetic joint infections (PJIs).

The results from the study will be compared to a cohort of patients, at the same clinical centers, who were treated using current standard, of care.

The aim of the study is to show an improved clinical outcome and a lower infection rate for the CERAMENT G or CERAMENT V group compared to the retrospective control cohort where neither CERAMENT G or CERAMENT V were used.

One endpoint of the study will be the rate of PJIs according to the Musculoskeletal Infection Society (MSIS) criteria during the one year follow-up.

Professor Carlo Romanò, the study’s Principal Investigator, said: “PJIs remain one of the most feared complications after orthopedic surgery. The ability of microorganisms to adhere to the surface of an implant and to immediately produce a protective biofilm is currently considered as the main challenge in the treatment of implant-related infections. At present, there is no accepted approach for preventing recurring PJIs in patients undergoing revision arthroplasty. We have already conducted a pilot study that showed a beneficial outcome from using CERAMENT G and CERAMENT V in a small series of patients undergoing two-stage knee and hip arthroplasty revisions. The aim of the larger study which we are now conducting is to confirm these promising initial results in a larger cohort of patients and compare the results to a retrospective control.”  

Richard Davies, CEO of BONESUPPORT, commented: “The start of this study is a key step in our strategy to build a compelling data set to support the prophylactic use of both CERAMENT G and CERAMENT V in patients undergoing hip and knee arthroplasty revisions. We are confident that CERAMENT G and CERAMENT V’s ability to elute the antibiotics gentamicin and vancomycin respectively, while at the same time, remodeling to bone, will allow them to deliver a reduction in the rate of PJIs in this study.”

For more information contact:

Richard Davies, CEO

Tel: +46 (0) 46 286 53 71

Björn Westberg, CFO

Tel: +46 (0) 46 286 53 60

Email: ir@bonesupport.com

Citigate Dewe Rogerson

David Dible, Mark Swallow, Marine Perrier

+44 (0)20 7638 9571

bonesupport@citigatedr.co.uk

About BONESUPPORT™ 

BONESUPPORT is an innovative and rapidly growing commercial stage orthobiologics company, based in Lund, Sweden. The Company develops and commercializes innovative injectable bio-ceramic bone graft substitutes that remodel to the patient’s own bone and have the capability of eluting drugs directly into the bone void. BONESUPPORT’s marketed bio-ceramic bone graft substitutes CERAMENT®BONE VOID FILLER (BVF), CERAMENT®G and CERAMENT®V are all based on the Company’s novel and proprietary CERAMENT technology platform.

The Company’s products are targeting a large addressable market opportunity across trauma, chronic osteomyelitis (bone infection), revision arthroplasty (replacement of a joint prosthesis) and infected diabetic foot.

BONESUPPORT’s total sales increased from SEK 41 million in 2014 to SEK 105 million in 2016, representing a compound annual growth rate of 60 percent. The Company’s financial target is to achieve revenue exceeding SEK 500 million in the financial year 2020, with a gross margin exceeding 85 percent and a positive operating profit.

The Company’s research and development is focused on the continuing development and refinement of its CERAMENT technology to extend its use into additional indications by the elution of other drugs and therapeutic agents. The Company currently has a pipeline of pre-clinical product candidates that have been designed to promote bone growth.

BONESUPPORT is listed on Nasdaq Stockholm and trades under the ticker “BONEX” (ISIN code: SE0009858152). Further information is available at www.bonesupport.com

*CERAMENT G: Not available in the United States, for investigational use only. CERAMENT V: Not available in the United States.

BONESUPPORT™ and CERAMENT® are registered trademarks.

 

This information was brought to you by Cision http://news.cision.com
http://news.cision.com/bonesupport-holding-ab/r/bonesupport—-first-patient-recruited-in-study-evaluating-cerament–g-and-cerament–v-in-patients-u,c2362136

Flexion Therapeutics Announces FDA Approval of Zilretta™ for Osteoarthritis (OA) Knee Pain

BURLINGTON, Mass., Oct. 06, 2017 (GLOBE NEWSWIRE) — Flexion Therapeutics, Inc. (Nasdaq:FLXN) today announced that the U.S. Food and Drug Administration (FDA) approved Zilretta™ (triamcinolone acetonide extended-release injectable suspension), the first and only extended-release, intra-articular injection for osteoarthritis knee pain. Zilretta is a non-opioid medicine that employs Flexion’s proprietary microsphere technology to provide proven pain relief over 12 weeks.

“The approval of Zilretta marks a major advancement in the treatment landscape for managing OA knee pain,” said Michael Clayman, M.D., President and Chief Executive Officer of Flexion. “It comes at a time when our society is in urgent need of non-addictive therapies to help the millions of Americans who suffer from this condition.” Dr. Clayman added, “We believe that Zilretta has the potential to be a transformative medicine for the more than five million patients who receive an intra-articular injection for OA knee pain each year.”

The FDA approval of Zilretta is based upon data from Flexion’s pivotal Phase 3 clinical trial. The randomized, double-blind study enrolled 484 patients at 37 centers worldwide.

Commenting on the approval, Andrew Spitzer, M.D., Co-Director, Joint Replacement Program, Cedars-Sinai Orthopaedic Center, said, “OA knee pain presents a host of challenges for patients and clinicians alike, and there has been very little innovation in this area in recent years. Zilretta is a groundbreaking new therapy, providing clinically meaningful pain relief with a safety profile that is similar to saline.”

Sometimes called degenerative joint disease or “wear and tear” arthritis, OA is a progressive and incurable condition and the most common form of arthritis. Its effects may range from intermittent discomfort to the loss of function and severe chronic pain associated with irreversible structural damage.

“As OA progresses, many patients experience intractable joint pain, which can ultimately lead to the need for a total joint replacement,” said John Richmond, M.D., Medical Director for Network Development, New England Baptist Hospital. “As a result, healthcare providers are eager for new, non-opioid therapies that may help patients manage their OA pain for extended periods of time. Zilretta gives us an important new non-surgical intervention.”

Zilretta’s label also includes the results from a double-blind, randomized, parallel-group trial, which examined blood glucose concentrations in patients with type 2 diabetes.

Steven Russell, M.D., Ph.D., Assistant Professor of Medicine, Massachusetts General Hospital Diabetes Research Center, commented, “Our trial demonstrated that Zilretta may avoid the disruptive blood glucose spikes that can be seen with corticosteroid use in patients coping with both knee OA and type 2 diabetes. As a practicing diabetologist, I believe the availability of Zilretta will make intra-articular injection of glucocorticoid an attractive option for these patients.”

The pain from OA of the knee can have a profound impact on the people it afflicts, often resulting in a cascade of consequences, which patient advocates warn is only expected to grow.

According to Seth Ginsberg, President and Co-Founder of CreakyJoints®, a national patient advocacy organization for people with all forms of arthritis, “Despite common misperceptions, OA is not a disease that is limited to the elderly. In fact, the average age of knee OA diagnosis has decreased while the number of people diagnosed with OA of the knee has been steadily rising. That’s why our community advocates for and welcomes new therapeutic options for people to consider in consultation with their doctor.”

Flexion expects Zilretta will be available in the U.S. by the end of October. For more information, visit www.Zilretta.com or call 1-844-FLEXION.

Conference Call Details

Flexion’s management will host a conference call Monday, October 9, 2017, at 8:00 a.m. ET. The dial-in number for the conference call is 855-770-0022 for domestic participants and 908-982-4677 for international participants, with Conference ID # 92539488. A live webcast of the conference call can also be accessed through the “Investors” tab on the Flexion Therapeutics website, and a replay will be available online after the call.

About Zilretta
Zilretta is the first and only FDA-approved extended-release intra-articular therapy for patients confronting osteoarthritis-related knee pain. Zilretta employs proprietary microsphere technology combining triamcinolone acetonide — a commonly administered, short-acting corticosteroid — with a poly lactic-co-glycolic acid (PLGA) matrix to provide extended pain relief over 12 weeks.

Indication and Important Safety Information
Indication: ZILRETTATM (triamcinolone acetonide extended-release injectable suspension) is indicated as an intra-articular injection for the management of osteoarthritis pain of the knee.

Limitations of Use: ZILRETTA is not intended for repeat administration.*

Contraindication: ZILRETTA is contraindicated in patients who are hypersensitive to triamcinolone acetonide, corticosteroids or any components of the product.

Warnings and Precautions

  • Intra-articular Use Only: ZILRETTA has not been evaluated and should not be administered by epidural, intrathecal, intravenous, intraocular, intramuscular, intradermal or subcutaneous routes. Serious events have been reported with epidural and intrathecal administration of corticosteroids and none are approved for this use. ZILRETTA should not be considered safe for epidural or intrathecal administration.
  • Hypersensitivity Reactions: Rare instances of anaphylaxis, including serious cases, have occurred in patients with hypersensitivity to corticosteroids.
  • Joint Infection and Damage: A marked increase in pain accompanied by local swelling, restriction of joint motion, fever and malaise are suggestive of septic arthritis. Examine joint fluid to exclude a septic process. If diagnosis is confirmed, institute appropriate antimicrobial therapy. Avoid injecting corticosteroids into a previously infected or unstable joint. Intra-articular administration may result in damage to joint tissues.
  • Increased Risk of Infections: Infection with any pathogen in any location of the body may be associated with corticosteroid use. Corticosteroids may increase the susceptibility to new infection and decrease resistance and the ability to localize infection.
  • Alterations in Endocrine Function: Corticosteroids can produce reversible hypothalamic-pituitary-adrenal axis suppression, with potential for adrenal insufficiency after withdrawal of treatment, which may persist for months. In situations of stress during that period, institute corticosteroid replacement therapy.
  • Cardiovascular and Renal Effects: Corticosteroids can cause blood pressure elevation, salt and water retention and increased potassium excretion. Monitor patients with congestive heart failure, hypertension and renal insufficiency for edema, weight gain and electrolyte imbalance. Dietary salt restriction and potassium supplementation may be needed.  
  • Increased Intraocular Pressure: Corticosteroid use may be associated with increased intraocular pressure. Monitor patients with elevated intraocular pressure for potential treatment adjustment.
  • Gastrointestinal Perforation: Corticosteroid administration may increase risk of gastrointestinal perforation in patients with certain GI disorders and fresh intestinal anastomoses. Avoid corticosteroids in these patients.
  • Alterations in Bone Density: Corticosteroids decrease bone formation and increase bone resorption. Special consideration should be given to patients with or at increased risk of osteoporosis prior to treatment.
  • Behavior and Mood Disturbances: Corticosteroids may cause adverse psychiatric reactions. Prior to treatment, special consideration should be given to patients with previous or current emotional instability or psychiatric illness. Advise patients to immediately report any behavior or mood disturbances.

Adverse Reactions: The most commonly reported adverse reactions (incidence ≥1%) in clinical studies included sinusitis, cough and contusions.

Please see the full Prescribing Information at www.ZILRETTAlabel.com.

The efficacy and safety of repeat administration of ZILRETTA have not been evaluated.

About Osteoarthritis (OA) of the Knee
OA, also known as degenerative joint disease, affects more than 30 million Americans and accounts for more than $185 billion in annual expenditures. In 2016, more than 15 million Americans were diagnosed with OA of the knee and the average age of physician-diagnosed knee OA has fallen by 16 years, from 72 in the 1990s to 56 in the 2010s. The prevalence of OA is expected to continue to increase as a result of aging, obesity and sports injuries. Each year, more than 15 million Americans are treated for OA-related knee pain, and approximately five million OA patients receive either an immediate-release corticosteroid or hyaluronic acid intra-articular injection to manage their knee pain.

About Flexion Therapeutics
Flexion Therapeutics (Nasdaq:FLXN) is a specialty pharmaceutical company focused on the development and commercialization of novel, local therapies for the treatment of patients with musculoskeletal conditions, beginning with OA, a type of degenerative arthritis. The company’s core values are focus, ingenuity, tenacity, transparency and fun. Flexion was named one of the Boston Business Journal’s 2017 Best Places to Work.

Forward-Looking Statements
Statements in this press release regarding matters that are not historical facts, including, but not limited to, statements relating to the future of Flexion; timing for the expected commercial availability of Zilretta; our plans to commercialize Zilretta and its market potential; expected increases in the rate of individuals with OA of the knee; and the potential therapeutic and other benefits of Zilretta, are forward-looking statements. These forward-looking statements are based on management’s expectations and assumptions as of the date of this press release and are subject to numerous risks and uncertainties, which could cause actual results to differ materially from those expressed or implied by such statements. These risks and uncertainties include, without limitation, risks associated with the process of launching a new pharmaceutical product in the United States; the risk that we may not be able to maintain and enforce our intellectual property, including intellectual property related to Zilretta; competition from alternative therapies; the risk that we may not be able to successfully hire, train and maintain an effective sales force to commercialize Zilretta; the risk that Zilretta may not be successfully commercialized, including as a result of limitations in Zilretta’s label and package insert information; risks regarding our ability to obtain adequate reimbursement from payors for Zilretta; risks related to the manufacture and distribution of Zilretta, including our reliance on sole sources of supply and distribution; risks related to key employees, markets, economic conditions, health care reform, prices and reimbursement rates; and other risks and uncertainties described in our filings with the Securities and Exchange Commission (SEC), including under the heading “Risk Factors” in our most recent Annual Report on Form 10-K and subsequent filings with the SEC. The forward-looking statements in this press release speak only as of the date of this press release, and we undertake no obligation to update or revise any of the statements. We caution investors not to place considerable reliance on the forward-looking statements contained in this press release.

Corporate Contact:
Scott Young
Sr. Director, Corporate Communications & Investor Relations
Flexion Therapeutics, Inc.
T: 781-305-7194
syoung@flexiontherapeutics.com

Game Ready® Receives FDA 510(k) Clearance For Med4 Elite™ Multi-Modality Recovery Device

CONCORD, Calif.Oct. 6, 2017 /PRNewswire/ — The injury and surgery recovery technology leader, Game Ready®, announced today that the company has received 510(k) clearance from the U.S. Food and Drug Administration (FDA) for its revolutionary orthopedic rehabilitation device, the Med4 Elite™.

Since the company was founded in 1997, Game Ready’s cold and compression system has become the treatment system of choice globally for thousands of leading healthcare professionals. Game Ready’s customers are Surgeons, Sports Medicine Physicians, Physical Therapists and Athletic Trainers, who rely on Game Ready for its award-winning technology to improve clinical outcomes and care for their patients. Over a million people worldwide have experienced a better, faster recovery by using the company’s products.

Built upon Game Ready’s patented technology, the Med4 Elite is a powerful rehabilitation tool. Controlled by an intuitive touchscreen computer interface, the system delivers iceless cold therapy, heat therapy, rapid contrast (alternating heat and cold) therapy and intermittent pneumatic compression therapy, providing healthcare practitioners with flexible treatment options for different patients, procedures, injuries and stages of rehabilitation.

“The future of orthopedic recovery has arrived,” said Craig Grabell, CEO & President. “With the launch of the Med4 Elite we are changing the post-operative and post-injury landscape. This is a landmark moment for Game Ready and our customers. The Med4 Elite features Game Ready’s proprietary Rapid Changeover Technology™ for contrast therapy, which allows for a groundbreaking switch from heat at 113 degrees Fahrenheit to cold at 38 degrees Fahrenheit in less than one minute. We are excited to build on the success of our GRPro 2.1, and add additional therapies that will help providers get all their patients back to being their best. Game Ready is not just for world-class athletes. Elite technology for everyone is what Game Ready is all about.”

Current methods of rapid contrast therapy require multiple cumbersome devices and a large amount of space. The Med4 Elite provides a greatly improved application of therapy due to it’s compact but powerful footprint. A wide portfolio of patented, anatomically designed Game Ready Wraps delivers the Med4 Elite therapy for a more effective and comfortable recovery experience.

Game Ready also received a CE Mark for the Med4 Elite in August of 2017 and began international sales, with first systems shipped to SpainFrance and the United Kingdom.

The company attributes its on-going success to adoption by thousands of medical and physical therapy centers, and its expanding international footprint, as well as being prescribed by the most elite surgeons and physicians. Game Ready’s clinically effective devices provide the power to accelerate the body’s natural repair mechanisms as well as treat symptoms.

About Game Ready 
Game Ready® (CoolSystems, Inc.) manufactures best-in-class orthopedic and sports medicine devices that help healthcare providers improve outcomes and the quality of the recovery experience for their patients. Technology innovation, meticulous testing and development, and a laser focus on customer and patient satisfaction put Game Ready in a class of its own.

 

SOURCE Game Ready

Xtant Medical Announces Consolidation of Fixation Operations to Montana and Closure of Dayton Facility

BELGRADE, Mont., Oct. 06, 2017 (GLOBE NEWSWIRE) — Xtant Medical Holdings, Inc. (NYSE American:XTNT), a leader in the development of regenerative medicine products and medical devices, today announced the closure of its Dayton, Ohio facility and the transitioning of its fixation operations to the Company’s headquarters in Belgrade, Montana. This decision will allow the Company to align operations with the current and future needs of its customers, and recognize cost-savings by consolidating facilities and reducing duplicative resources.

“In an effort to maximize the benefit of the 2015 merger with X-Spine, and optimize synergies including efficiencies and cost savings, we made the difficult decision of transitioning operations to Montana and closing the Dayton facility,” said Carl O’Connell, CEO of the Company. “Hardware will continue to be an important aspect of our business, and is an area we intend to build on in the future. We remain excited about the new technologies in development. With the continued efforts in 2017 towards restructuring and reducing costs, we are looking to strategically invest in both our existing business and new market opportunities, for hardware and biologics in 2018. We will be working to make this transition as smooth as possible for our employees and our customers.”

The Dayton, Ohio facility employs approximately 55 employees in various quality assurance, regulatory, inventory management, finance, engineering, and distribution positions. Many of these functions will ultimately transition to our Montana facility. Once the transition is completed, annualized cost savings are anticipated to be in excess of $2 million, resulting from right-sizing the organization and reduction in facilities. The one-time cost for executing this change is estimated to be $1.5 million.

The Company will file the Worker Adjustment and Retaining Notification with the State of Ohio and the Department of Job and Family Services.

About Xtant Medical
Xtant Medical Holdings, Inc. (NYSE American:XTNT) develops, manufactures and markets class-leading regenerative medicine products and medical devices for domestic and international markets. Xtant products serve the specialized needs of orthopedic and neurological surgeons, including orthobiologics for the promotion of bone healing, implants and instrumentation for the treatment of spinal disease, tissue grafts for the treatment of orthopedic disorders, and biologics to promote healing following cranial, and foot and ankle surgeries. With core competencies in both biologic and non-biologic surgical technologies, Xtant can leverage its resources to successfully compete in global neurological and orthopedic surgery markets. For further information, please visit www.xtantmedical.com.

Important Cautions Regarding Forward-looking Statements
This press release contains certain disclosures that may be deemed forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995 that are subject to significant risks and uncertainties. Forward-looking statements include statements that are predictive in nature, that depend upon or refer to future events or conditions, or that include words such as “continue,” “efforts,” “expects,” “anticipates,” “intends,” “plans,” “believes,” “estimates,” “projects,” “forecasts,” “strategy,” “will,” “goal,” “target,” “prospects,” “potential,” “optimistic,” “confident,” “likely,” “probable” or similar expressions or the negative thereof. Statements of historical fact also may be deemed to be forward-looking statements. We caution that these statements by their nature involve risks and uncertainties, and actual results may differ materially depending on a variety of important factors, including, among others: the ability to comply with covenants in the Company’s senior credit facility and to make deferred interest payments; the ability to maintain sufficient liquidity to fund operations; the ability to remain listed on the NYSE MKT; the ability to obtain financing on reasonable terms; the ability to increase revenue; the ability to continue as a going concern; the ability to maintain sufficient liquidity to fund operations; the ability to achieve expected results; the ability to remain competitive; government regulations; the ability to innovate and develop new products; the ability to obtain donor cadavers for products; the ability to engage and retain qualified technical personnel and members of the Company’s management team; the availability of Company facilities; government and third-party coverage and reimbursement for Company products; the ability to obtain regulatory approvals; the ability to successfully integrate recent and future business combinations or acquisitions; the ability to use net operating loss carry-forwards to offset future taxable income; the ability to deduct all or a portion of the interest payments on the notes for U.S. federal income tax purposes; the ability to service Company debt; product liability claims and other litigation to which we may be subjected; product recalls and defects; timing and results of clinical studies; the ability to obtain and protect Company intellectual property and proprietary rights; infringement and ownership of intellectual property; the ability to remain accredited with the American Association of Tissue Banks; influence by Company management; the ability to pay dividends; and the ability to issue preferred stock; and other factors.

Additional risk factors are listed in the Company’s Annual Report on Form 10-K and Quarterly Reports on Form 10-Q under the heading “Risk Factors.” The Company undertakes no obligation to release publicly any revisions to any forward-looking statements to reflect events or circumstances after the date hereof or to reflect the occurrence of unanticipated events, except as required by law.

Investor Contact

CG CAPITAL
Rich Cockrell
877.889.1972
investorrelations@cg.capital

Company Contact

Xtant Medical
Molly Mason
mmason@xtantmedical.com